ROUNDUP® POWERFLEX 480 Glyphosate 1L/5L

Description

ROUNDUP® POWERFLEX 480 /1L/ 5L
Product Description:
ROUNDUP PowerFlex 480 is a herbicide for the control of monocotyledonous and dicotyledonous weeds in arable and grass fields, in vegetable crops and in mustard and brassica species, forage peas and neem flowers).
Application Directions :
A herbicide for pre-sowing, pre-harvest, stubble, vine, fruit and vegetable crop applications, set-aside and uncultivated areas and forestry Roundup®.
Recommended use:
- Roundup®PowerFlex is effective and durable against a broad spectrum of weeds and grass weeds in a wide range of crops.
- The uptake and distribution of the active ingredient in the plant is critical to the successful application of glyphosate. Innovative formulation technology is the key to success.
Due to its special, effective and lasting effect, no further treatment is necessary. The benefits optimize your cost and time management!
- The development focus of the new Roundup® generation, to continuously adapt to growing agricultural needs, has also been taken into account in the 33% higher active ingredient concentration.
- Roundup®PowerFlex is a water-soluble concentrate with a high active ingredient content of 480 g glyphosate per liter.
Application:
Whether for pre-seeding, pre-harvest, stubble application, in viticulture, orcharding, vegetable production, set-aside areas, as well as non-crop and forestry, Roundup®PowerFlex achieves an effective effect in the various segments.
Use throughout the growing season - even after short night frosts down to -4°C.
Weed species to be controlled must have formed sufficient leaf mass and be sufficiently wetted.
Application is possible after rain or when weeds are dewy but not dripping wet.
A slow onset of symptoms due to weather conditions has no influence on the sustainability of the effect.
Optimum active ingredient uptake and distribution:
For successful glyphosate application, active ingredient uptake and distribution in the plant is critical. Innovative formulation technology is the key to success.
Roundup®PowerFlex contains a new innovative wetting agent system that does not cause a burning effect on the leaf. Gentle penetration into the plant preserves cell structures and keeps the plant's sap flow intact, ensuring Roundup®PowerFlex is well absorbed and continuously transported to the roots. Consequently, more active ingredient reaches the plant root-deep, resulting in a highly effective action.
Due to the special, effective, and sustainable effect, a post-treatment is not necessary.
The benefits optimize your cost and time management!Reduced risk of drift:
There is a potential risk of drift when applying crop protection products. As a result, non-target areas (e.g., adjacent land, field margins, water bodies) may be impacted.
Exceeding performance limits:
Excellent efficacy even in adverse conditions Glyphosate-containing products reach efficacy and therefore performance limits in extremely wet, cool or very dry conditions.
Roundup®PowerFlex impressively overcomes these limits and demonstrates efficacy under a wide range of application conditions, such as humidity, temperature, or metabolic activity. This gives the field greater independence and flexibility.
Roundup®PowerFlex - shortened waiting time to tillage For perennial weeds, Roundup®PowerFlex sets a new benchmark! The waiting time before tillage has been further reduced compared to the previous standard and is only:
2 days for treatments against couch grass*
4 days for other perennial weeds*.
*Application rate:
3.75 l/ha under optimal conditions. Please refer to the directions for use for additional information.
Rainfast after only 1 hour
The new Roundup®PowerFlex is rainfast after only 1 hour. Microscopic tests confirm this impressively. In practice, this means greater flexibility and efficacy.
Excellent performance - high flexibility:
With the new Roundup®PowerFlex, we help you make the most of available field days. All work can be planned and carried out safely thanks to the high flexibility of Roundup®PowerFlex:
Excellent performance
Particularly good effect even in unfavorable conditions
Shortened waiting time between application and subsequent soil cultivation
Tallowamine-free wetting agent
Rainfast after only 1 hour
Incredibly good miscibility
Reduced risk of drift.
One original - four generations:
Already in the early phase of product development, the new Roundup®PowerFlex was extensively tested for its product properties in several test series under both greenhouse and field conditions. The expectations for Roundup®PowerFlex have not only been met, but far exceeded. Over the past four decades, Roundup® formulations have been continuously optimised and improved.
No two Roundups are the same! Roundup®PowerFlex is the fourth generation of Roundup® product change. The following overview shows the individual development stages of the continuous development of Roundup® products such as Roundup UltraMax or Roundup.
Dosage and application:
Roundup PowerFlex 0.225-0.375 ml /m² area.
Brush on in a 33 % solution
Active ingredient:
Active ingredient content: 480 g/l glyphosate (588 g/l potassium salt).
Formulation: Water-soluble concentrate
Information according to the Chemicals Prohibition Ordinance for further details see product description Manufacturer's link.
N (Dangerous for the environment)
SURFACES:
·
NN2001: The product is classified as slightly harmful to populations of relevant beneficial insects.
·
NN2002: The product is classified as slightly harmful to populations of relevant predatory mites and spiders.
·
NN2842: The product is classified as weakly damaging to populations of the species Aphidius rhopalosiphi (braconid wasp).
·
NW261: The product is toxic to fish.
·
NW262: The product is toxic to algae.
·
SB001: Avoid all unnecessary contact with the product. Misuse may cause damage to health.
·
SB005: If medical advice is needed, have product container or label at hand.
·
SB010: Keep out of reach of children.
·
SB111: For requirements on personal protective equipment when handling plant protection products, refer to the safety data sheet and the instructions for use of the plant protection product, as well as the BVL guideline "Personal protective equipment when handling plant protection products" of the Federal Office of Consumer Protection and Food Safety.
SB166: Do not eat, drink or smoke when handling the product.
SF245-02: Ensure that treated areas/crops are not re-entered until the pesticide film has dried.
SS206: Wear work clothes (if no specific protective clothing is required) and sturdy footwear (e.g., rubber boots) when applying/handling pesticides.
VH368: The content of N-nitrosoglyphosate in the technical concentrate of glyphosate or glyphosate salts shall not exceed 1mg/kg. The content of formaldehyde shall not exceed 1,3 g/kg on an equivalent weight basis of glyphosate acid.
WH952: On the packaging and in the instructions for use, the information on the labelling of the mechanism of action shall be directly assigned to each corresponding active substance name as additional information.
WMG: Mechanism of action (HRAC group): G.
DIRECTIONS FOR USE:
·
NG352: Maintain a 40-day interval between applications when the combined application rate of two consecutive sprays of this and other glyphosate-containing crop protection products exceeds a total of 2.9 kg glyphosate / ha.
·
NW468: Do not allow application fluids and their residues, agents and their residues, emptied containers or packaging as well as cleaning and rinsing fluids to enter water. This also applies to indirect inputs via gullies, yard and street drains, and storm and sewage systems.
·
SF275-EEWE: Ensure that long working clothes and sturdy footwear are worn during follow-up work/inspections with direct contact to treated plants/areas after application in vineyards up to and including harvest.
·
SF275-14GE: Ensure that long working clothes and sturdy footwear are worn during follow-up work/inspections with direct contact to the treated plants/areas within 14 days after application in vegetables.
·
SF275-28OS: Ensure that long working clothes and sturdy footwear are worn during follow-up work/inspections with direct contact to the treated plants/areas within 28 days after application in fruit tree crops and in bush fruit.
·
SF275-35ZB: Ensure that long working clothes and sturdy footwear are worn during follow-up work/inspections with direct contact to the treated plants/areas within 35 days after application in ornamental and nursery crops.
·
SS701-1: Wear protective gloves when applying with a brush (plant protection).
APPROVED CROPS:
Cropping systems, grubs, hardwoods, conifers, brassica species (cultivated plants), mustard species, paths and sites with woody plants, tree seedlings, paths and sites with woody plants, turf fruit trees except raspberry-type trees, bob, forage peas, vegetable crops, asparagus, meadows, pastures, cereals (barley, oats, rye, triticale, wheat), pome fruits, edible onions, set-aside areas, carrots.
The registration number:
GP 006149-00/018